H.P.C. Tubular Lock Drill

SKU # HP/AG2

Read Review(s) | Log in to Review

H.P.C. Tubular Lock Drill

The HPC AG-2 oversized tubular lock saw is a destructive-entry tool designed for servicing tubular (round) locks with an oversized 0.394" (10 mm) keyway when picking is not possible. Common applications include commercial ACE tubular locks found on vending machines, some safes, and certain motorcycle ACE tubular locks. The saw fits any 1/4" (6.35 mm) drill chuck and is intended to remove pins to the shear line so a blank key can be used to turn the cylinder.

  • Oversize Tool and Extra Saw for .394" (10mm) Diameter
US$46.08

Description:

Description:

If picking is not possible, lock-outs of tubular key locks can still be serviced. These hole saws destroy the pins at the shear line. Hole saws are available for standard and oversize keyways. Saws will fit any 1/4″ (6.35mm) electric drill. Saw life is approximately 3 openings. Not for use on locks with hardened pins or ball bearings in the keyway

  • AG-1 Standard Size Saw
  • G-1 Replacement Saw for AG-1
  • AG-2 Oversized Saw
  • G-2 Replacement Saw for AG-1

Features:

Features:

H.P.C. Tubular Lock Drill

The HPC AG-2 oversized tubular lock saw is a destructive-entry tool designed for servicing tubular (round) locks with an oversized 0.394" (10 mm) keyway when picking is not possible. Common applications include commercial ACE tubular locks found on vending machines, some safes, and certain motorcycle ACE tubular locks. The saw fits any 1/4" (6.35 mm) drill chuck and is intended to remove pins to the shear line so a blank key can be used to turn the cylinder.

  • Oversize Tool and Extra Saw for .394" (10mm) Diameter

Reviews

Reviews

There is no review yet for this item.
To top