FE595-PLY Keypad Lever Set by Schlage FE-Series
The Schlage FE595-PLY is a Grade 2 keyless leverset that is part of the Schlage FE-Series Collection.
Finish: The Schlage FE595-PLY Leverset comes in Satin Chrome (626) finish.
Handing: The FE595-PLY Plymouth Leverset with Elan Lever is a non-handed (reversible) lever.
The FE595 Keypad Door Lock gives you the freedom of having the door auto-lock, or remain in the unlocked position until you decide to have it begin auto-locking again. The Flex series is an unbeatable value for residential applications, small office entry doors, or inner office doors. With a number of finishes and lever styles to choose from, you are guaranteed to find a great lock! Combining yesterday's craftsmanship with today's fit and function, the Schlage line of keypad entry locks with flex may just be the last locks you will ever need. Just think, you never again have to fumble, lose, or worry about being locked out. Keyless convenience has enhanced the lifestyles of people everywhere, why not start enjoying it for yourself today!
Features and Benefits:
- ANSI 156.5/BHMA Grade 2 for higher residential security.
- Reversible lever, installs on left or right-handed doors.
- Pre-set, unique, six-digit programming code, two pre-set unique four-digit user codes (19 code capacity).
- Flex-Lock: Flexibility to choose; switch from automatic relocking to unlocked as needed.
- Silicone rubber, wear-resistant buttons with LED backlight.
- 9-volt battery operation; no special wiring required.
- Provides additional layers or keyelss security & safety inside your home or office.
- Easily replace most existing locks with a screwdriver in about 30 minutes.
- No programming required; preset with two user codes so it's ready to use right out of the box.
All Schlage Locks come standard with Round Corner Adjustable Latch (RCAL) and Round Corner Strike (RCS).
All Schlage Locks come standard with Drive-in Collars needed to convert standard latches into the drive-in function.
Door Range: 1-3/8" - 1-3/4" (35mm - 44mm).
Backset: Dual Backset Latch; adjustable for 2-3/8" or 2-3/4" backset.
Door Range: 1-3/8" - 1-3/4" (35mm - 44mm).
Backset: Dual Backset Latch; adjustable for 2-3/8" or 2-3/4" backset.
Strike: 1-5/8" x 2-1/4" Radius Corner Faceplate, 7/8" Housing Diameter, 1/2" Throw, Round Corner.
Functions:
- Keyed Entry (Entrance): Unlocked by key from outside when outer lever is locked by turn-button in inside lever; Inside lever always unlocked.
* For F595 PLY Entry Locks Only:
Cylinder: 5-Pin, Schlage "C" Keyway (SC1), Keyed Different (KD).
- Pin & Tumbler (Standard)
Keying Options: See "Keying" for the following keying options on the F595 PLY Entry Lever:
- Keyed Alike: 1 key works all locks.
- Master Keyed: Locks are Keyed Different (KD) with 2 keys per lock, 1 Master Key opens all locks.
- Construction Key: PK.
Instructions & Templates
Click on the links below to download helpful instructions & templates for this product.
Schlage FE595 Series Lever Set
Download Installation Instructions
Schlage Electronic Lock Introduction
FE595 Leverset - How to Program
FE595 Leverset - How to Install