PTH - Electric Power Transfer Hinge by SDC
Electric Power transfer hinges provide a concealed and vandal resistant method for running wires from the frame to doors equipped with electric locks and exit devices.
Applications: Installed in the center hinge position of the door, PTH Power Transfer Hinges provide the concealed wires required between the door and the frame, for the purpose of powering and monitoring electric door hardware:
- Electric Lock Power and Control.
- Door and Lock Status Signaling.
- Request-to-Exit Signaling.
Compatible With:
- Electrified Mortise Locks
- Electrified Cylindrical Locks
- Delayed Egress Exit Devices
- Electric Trim
- Electric Strikes in Pair of Doors
Features and Benefits:
- UL 10B Listed for 3Hr fire rated doors. Look for the 'F' mark located next to the UL symbol that confirms the PTH series hinge UL fire rating.
- Wire replacement warranty.
- 4-1/2" cable standard.
- Dull Chrome (626) finish.
PTH-2+4 16 Amp Inrush, 6 conductor power transfer hinge
1-pair 16 Amp inrush, 4 Amp continuous; 2-pair 1
Amp @ 12/24V
4-1/2" x 4-1/2" standard weight
626 Dull Chrome finish
PTH-4 Four (4) Conductor Power Transfer Hinge
1 Amp @ 12/24V per pair
4-1/2" x 4-1/2" standard weight
PTH-10 Ten (10) COnductor Power Transfer Hinge
1 Amp @ 12/24V per pair
4-1/2" x 4-1/2" standard weight
All hinges provided with 5' cable
Optional Features:
PTH Hinge with Door Position Switch (DPS): Concealed Door Position Switch SPDT, 250mA @ 30VDC.