7110 - Electric Strike by Adams Rite
Designed for use with Adams Rite deadlatches or cylindrical locksets with 1/2" [12.7 mm] to 5/8" [15.9 mm] latchbolt projection. For use in aluminum, hollow metal, or wood applications.
Remote electrical control of any door equipped with an Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical lockset with 1/2" [12.7 mm] to 5/8" [15.9 mm] latchbolt projection. Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself.
Case
1" x 3-3/8" x 1-5/8" deep [25.4 mm x 85.7 mm x 41.3 mm deep].
Strike Opening
5/8" x 1-7/16" x 1/2" deep [15.9 mm x 36.5 mm x 12.7 mm deep]. Bolt retaining keeper is stainless steel. Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.
Strike Lip
Basic strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge.
Latchbolt Projection: 1/2" to 5/8" [12.7 mm to 15.9 mm].
Faceplate: 1-7/16" x 7-15/16" [36.5 mm x 201.6 mm]. Flat with Radius Corners.
Standard Package: Individually boxed with mounting screws, mounting clips, adhesiver shims to accommodate jamb or stile extrusion thickness greater or less than nominal 1/8" [3.2 mm].
Current Draw:
0.33A at 12 VDC, 1.42A at 12 VAC
0.22A at 16 VDC, 0.63A at 16 VAC
0.17A at 24 VDC, 0.74A at 24 VAC
Voltage: Available in 12, 16, or 24 Volt AC and DC. DC continuous units are silent, AC intermittent units "buzz" on operation.
Fail Safe | Fail Secure: Field selectable at a time of installation. However, AC intermittent solenoid must be used continously in either.