86911 Blythe Appliance Pull by Emtek Designer Brass Collection
Introducing the Designer Brass Collection; provides the basics of any bathroom, kitchen or bedroom remodel. Emtek's Designer Brass Collection is full of understated yet elegant designs fit for traditional, classic, transitional, and contemporary dècors alike. Add style and charm to the decor of your home with different finish and design choices.
- Fun Contemporary / Modern Design.
- Fits Well with Other Cabinet Pulls from the Designer Brass Collection.
Standard Appliance and Door Pulls - Appliance/Door Pulls are drilled and tapped for 3/8"-16 thread to accommodate thread adapters.
- Two- Thread adapter for 1/4-20 thread.
- Two- 1/4-20 Flat head machine screws x 1" long.
- Two- Thread adapters for 10-32 thread.
- Two- 10-32 Flat head machine screws x 1" long.
- Two- 10-32 Flat head machine screws x 2" long.
- Two- Threaded Washers.
- Two- Decorative Caps.
Back-to-Back (BTB) Appliance and Door Pulls - Most standard appliance pulls and door pulls are available in Back to Back function. Fits door thickness from 1-3/8" to 2-1/4". Specify if thicker in the Comments Box upon checkout.
- One grip with 10-32 thread in the stem.
- One mating grip with 3/8" diameter hole in the stem.
- Two 3/8" diameter bevel head screws with 10-32 shaft by 3-1/4" long.
- Two 10-32 set screws.
Finish: The 86911 Blythe Appliance Pull comes in Satin Brass (US4), Oil Rubbed Bronze (US10B), Polished Nickel (US14), Satin Nickel (US15), Flat Black (US19), and Polished Chrome (US26) finish.
- Center-to-Center: 18".
- Projection: 2".