86169 Twist Door Pull by Emtek Lost Wax Cast Bronze Collection
Emtek's door pulls and plates for non-latching doors are as exquisitely and finely crafted as its operating locks, and are made of the same beautiful and rugged materials. Door pulls require no door prep. Door pulls are surface mounted, and may be located anywhere on the door you choose.
Introducing the Lost Wax Cast Bronze Collection; takes its name from the traditional Tuscan method of construction which used lost wax castings. This ancient method captures fine design details while retaining a warm, textured surface after being finished with hand-applied patina.
- Cast Bronze Construction.
- Fits Well with Other Cabinet Pulls from the Lost Wax Cast Bronze Collection.
Standard Appliance and Door Pulls - Appliance/Door Pulls are drilled and tapped for 3/8"-16 thread to accommodate thread adapters.
- Two- Thread adapter for 1/4-20 thread.
- Two- 1/4-20 Flat head machine screws x 1" long.
- Two- Thread adapters for 10-32 thread.
- Two- 10-32 Flat head machine screws x 1" long.
- Two- 10-32 Flat head machine screws x 2" long.
- Two- Threaded Washers.
- Two- Decorative Caps.
Back-to-Back (BTB) Appliance and Door Pulls - Most standard appliance pulls and door pulls are available in Back to Back function. Fits door thickness from 1-3/8" to 2-1/4". Specify if thicker in the Comments Box upon checkout.
- One grip with 10-32 thread in the stem.
- One mating grip with 3/8" diameter hole in the stem.
- Two 3/8" diameter bevel head screws with 10-32 shaft by 3-1/4" long.
- Two 10-32 set screws.
Finish: The 86169 Twist Door Pull comes in Flat Black (FB) and Medium Bronze (MB) finish.
- Center-to-Center: 12".
- Height: 13-1/4".
- Projection: 2-3/4".