M62-SS - Durable Magnalock by Securitron
The Ultimate in Magnalock® Versatility for Indoor/Outdoor Higher Security!
The M62 is a strong, easy-to-maintain solution for interior, perimeter and exterior access control. With unsurpassed durability, the M62 will last long after most buildings wear out.
1200 lbs. holding force Magnalock with automatic dual voltage. Recommended for exterior and perimeter doors through which criminals could gain entrance to cause substantial economic loss.
A pair of Split Strikes may be used for each leaf of a double door with no mullion to provide traffic control using a single magnet.
Features and Benefits:
- Surface mounts easily with a minimum of tools.
- Ultra-secure collapsing blind nuts mount to the door frame for strength and reliability.
- Fully sealed for weather-proof operations.
- 10 ft. [3.05m] of jacketed, stranded conductor cable.
- Automatic dual voltage - no field adjustment required.
- Instant release circuit - no residual magnetism.
- Noise suppresion with included MOV.
- Efficient, low power usage.
- Rust resistant - All ferrous metal surfaces plated for durability.
- Fits in 2.5" of flat mounting space.
- Architectural brushed stainless steel finish (US32D/630).
- UL 10C Listed.
- CAN4-S104, CAN/ULC-S533 Listed.
- ANSI/UL 294 Listed.
- CSA-C22.2 No. 205 Listed.
- ANSI/BHMA A156.23, Grade 1; E08501-500.
- CSFM - California State Fire Marshal Approved.
- MEA - City of New York Approved.
- CE: EN 50081-1(92), EN 61000-6-2(99) Approved.
- Patent: 8,094,017.
Holding Force: 1200 lbs [544kg]
Electrical: 250mA at 12VDC; 150mA at 24VDC
Operating Temperature: -40 to +140F [-40 to +60C]
(B) BondSTAT Magnetic Bond Sensor (MBS): Unlike typical door positon switches that indicate whether or not a door is closed, BondSTAT also notifies your access control or alarm system that the door is accurately secured. BondSTAT's magnetic field monitors the entire surface of the armature, not just the center or corner. Any variation in the armature's position beyond established installation parameters will initiate a signal indicating the Magnalock in not generating full holding potential.