4510 - Standard Duty Deadlatch by Adams Rite
4510 Standard Duty Deadlatches provide flexible traffic control during and after business hours.
The 4510 Standard Duty Deadlatch offers flexibility of traffic control during and after business hours. A reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certian times and exit-only at other times. Interchangeable, without stile modification, with any MS1850A or MS1850S Deadlock of same backset and faceplate shape. Does not, however, provide the same maximum security level as the MS® Deadlock.
Turn key or operate handle to retract spring-loaded Latchbolt. To hold bolt retracted, push it in and secure by reverse turn of key. Uses any standard mortise cylinder with MS® dimensioned cam.
While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging.
Finish: The Adams Rite 4510 Deadlatch comes in Clear Anodized (628) and Dark Bronze Anodized (313) finish.
Handing: The Adams Rite 4510 Deadlatch comes in LH or RHR (Left Hand/Right Hand Reverse) and RH or LHR (Right Hand/Left Hand Reverse). Click here for Handing Diagram.
Strike Size: The Adams Rite 4510 Deadlatch comes in 2.63" and 4.63" strike size.
Cylinder Backset: The Adams Rite 4510 Deadlatch comes in 31/32" backset.
Faceplate Shape: Flat (4510). Measures 1" x 6-7/8".
Case: Steel with corrosion-resistant plating, measures 1" x 5-13/16" x depth.
Strike: Standard strike furnished is 4902-01 for flat jamb where door closes flush or nearly flush.
Latchbolt: 1/2" x 1" x 1/2" throw. All metal with hardened steel internal pins. Handing is reversible without special tools.
Auxiliary Bolt: All metal. Deadlocks latchbolt to prevent "loiding" or case-knife entry.
Cylinder Cam: All Standard Duty Deadlatch (4510) functions are sold Less Cylinder; see "Companion Items" above for all Cylinder & Keying options.