90 Series Surface Overhead Door Holder and Stop by Glynn-Johnson Hardware
Glynn-Johnson 90 Series Holders and Stops are the most rugged models available for heavy-duty applications. The channel is surface-mounted to the door, most often with sex bolts, and the jamb bracket is surface mounted to the jamb, requiring minimal door and fram preparation.
These versatile units can be used in conjunction with most surface-applied door closers. The provided templates allow for variable mounting positions, ranging from 85° to 110° Hold-Open/Stop angle. These templates are designed for installation in almost all types of doors, including doors with conventional butt-type hinges or specialty hinges.
Hold-Open (H) - Hold-Open models provide a convenient method of holding the door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening. The Hold-Open function can easily be turned on or off by simply rotating the serrated knob on the bottom of the channel. This knob engages the Hold-Open mechanism, allowing the door to be held open at a predetermined position ranging from 85° to 110°. When the knob is flipped over, it acts as a stop and shock absorber.
Stop-Only (S) - When the Hold-Open function is not a requirement, Stop-Only models provide a reliable method of door control. Stop-Only models provide the same shock-absorbing capability as Hold-Open models. The Stop-Only model may be used on fire doors.
Size 3 (903) - 27-1/16" - 33".
Size 4 (904) - 33-1/16" - 39".
Size 5 (905) - 39-1/16" - 45".
Size 6 (906) - 45-1/16" - 54".
Features and Benefits:
- Improved Compatibility with Door Closers.
- Single-Acting Doors.
- Interior/Exterior Applications.
- Easy to install.
- Improved Corrosion Resistance.
Finish: The Glynn-Johnson 90 Overhead Door Holder and Stop comes in Satin Stainless Steel (US32D) finish.